Buffing Pad Care Instructions
Learn how to clean buffing and polishing pads to maximize their lifespans and minimize replacement costs.
The Importance of Buffing Pad Care
Consistent Results
Buffing Pad Longevity
Minimal Contamination
Efficiency
System 4000® Pad Washer with PureFlo® Technology
Maintenance by Buffing Pad Type
Foam buffing pads can be cleaned in a number of ways. Proper cleaning can lengthen the pad’s life. Note: Using a pressure washer or high-pressure compressed air can damage or reduce the longevity of the foam or foam pad. We recommend using a different method to avoid any issues.
Option 1: System 2000™ Pad Washer or System 4000® Pad Washer with PureFlo® Technology
- Wash with Snappy Clean Boost™ Pad Cleaning Powder in pad washer
- Rinse with clean water
- Air dry
Option 2: Machine Wash
We recommend washing no more than 10 pads at a time and removing the pads from the washing machine promptly after the cycle is complete. Pads can be damaged or permanently deformed if left in the washing machine after the spin cycle is complete. Additionally, damage can occur if too many pads are washed at once.
- Wash with Snappy Clean Boost™ Pad Cleaning Powder
- Run on gentle cycle
- Use cold or warm water only; hot water can shrink Velcro loop
- Allow to air dry
Microfiber buffing pads should be cleaned regularly to remove built-up polish and residue in the pad and to fluff the microfiber material, which results in better performance. Unlike pads made from other materials, microfiber pads can be cleaned with compressed air.
Compressed Air
- Blow gun or tornado
- Must use respirator or dust mask and eye protection
Option 1: System 4000® Pad Washer with PureFlo® Technology
- Wash with Snappy Clean Boost™ Pad Cleaning Powder in pad washer
- Rinse with clean water
- Air dry
Option 2: Machine Wash
We recommend washing no more than 10 buffing pads at a time and removing the pads from the washing machine promptly after the cycle is complete. Buffing pads can be damaged or permanently deformed if left in the washing machine after the spin cycle is complete. Additionally, damage can occur if too many pads are washed at once.
- Wash with Snappy Clean Boost™ Pad Cleaning Powder
- Run on gentle cycle
- Use cold or warm water only; hot water can shrink Velcro loop
- Allow to air dry
Knitted wool pads can be easily cleaned with a standard pad brush or can be washed using the System 2000™ or System 4000® Pad Washer. These pads can also be washed in a washing machine, but wool pads can become slightly altered when washed or cleaned with water.
Option 1: System 2000™ Pad Washer or System 4000® Pad Washer with PureFlo® Technology
- Wash with Snappy Clean Boost™ Pad Cleaning Powder in pad washer
- Rinse with clean water
- Air dry
Option 2: Machine Wash
- Remove all dried residue with spur prior to washing
- Wash with Snappy Clean Boost™ Pad Cleaning Powder
- Run on gentle cycle
- Use cold or warm water only; hot water can shrink wool
- Allow to air dry
We recommend cleaning these buffing pads regularly using a metal spur made for this specific application. The spur helps break up compound and residue that has built up and dried in the pad.
Wool pads can be cleaned with water, but at your own discretion. These buffing pads are built to withstand the washing process, but wool can shrink and modify during the cleaning process once water is introduced. Washing with water will not “damage” the pad but can change the buffing performance. If washed with water, we recommend using Snappy Clean Boost™ pad cleaning powder to break up and clean residue before fully rinsing the pad clean.
Option 1: System 2000™ Pad Washer or System 4000® Pad Washer with PureFlo® Technology
- Wash with Snappy Clean Boost™ Pad Cleaning Powder in pad washer
- Rinse with clean water
- Air dry
Option 2: Machine Wash
- Remove all dried residue with spur prior to washing
- Wash with Snappy Clean Boost™ Pad Cleaning Powder
- Run on gentle cycle
- Use cold or warm water only; hot water can shrink wool
- Allow to air dry
To keep your carpet and upholstery cleaning pads in good condition, use on slow or low speeds and use light or moderate pressure when cleaning upholstery.
To clean:
- Wipe excess cleaning product with a towel
- Rinse well with water
- Spin dry or place pad face down to air dry.
Our resilient, adaptive foam pads are designed for durability, but proper maintenance can extend their lifespan.
Option 1: System 2000™ Pad Washer or System 4000® Pad Washer with PureFlo® Technology
- Wash with Snappy Clean Boost™ Pad Cleaning Powder in pad washer
- Rinse with clean water
- Air dry
Option 2: Machine Wash
We recommend washing no more than 10 pads at a time and removing the pads from the washing machine promptly after the cycle is complete. Pads can be damaged or permanently deformed if left in the washing machine after the spin cycle is complete. Additionally, damage can occur if too many pads are washed at once.
- Wash with Snappy Clean Boost™ Pad Cleaning Powder
- Run on gentle cycle
- Use cold or warm water only; hot water can shrink Velcro loop
- Allow to air dry
Snappy Clean Boost™ Pad Cleaning Powder is a concentrated cleaner that releases wax and polish from foam or wool pads with just a few minutes of soaking.
Benefits
- Keeps buffing pads clean, soft and supple
- Bio-degradable and non-flammable
- Environmentally safe
- Rinses out easily